How to Create Your Own Dog Mask – The Basics In this report we’re going to look at how to make your own dog mask. We’ll cover the basics and then go on to look at some of the more advanced tips and techniques that you can use. If you have a dog that likes to bark, and particularly if your dog loves to play in the garden and other regions of the house, you need to get them some particular dog protection. Paper Plate 3d Dog Mask DIY Materials: This is the first part of the set-up that will look a little scary at first, but it is really very straightforward. All you’ve got to do is take a cardboard cutting board and cut the cardboard into the shape of your mask. You can’t just cut a rectangular shape out of the cardboard, so you’ll have to cut around the edge of the mask so you get something that looks like a cone. The most important thing here is to be realistic with what type of paper plate which you’re using. Then you’ll have to wrap the cardboard around the edges of the paper plate, making certain that there is a good seal between the two pieces so you can make certain that nothing will leak once you put the mask on. Make sure the edges are cut so the edges are not sharp, as this can damage the edges of the mask. Glue it on! The next step involves using some paint. You should spray the paint over the cardboard, making sure that it runs smoothly and evenly across the whole mask. You will want to start with one side of the mask first, so that you can work your way around it before moving onto the other side. The paint needs to be slightly thicker than the cardboard, and it is best that you leave about one-fifth of an inch of paint on the edges so that it runs across the cardboard. Don’t worry too much about the paint getting stuck to your mask. It’s easy to remove it later, and it will leave you with a wonderful finished mask to show off to everyone! It’s also a good idea to wash away any excess paint once you are done, so you don’t end up with smudges or smears on your dog. Then it’s time to paste the mask on your dog’s head. First you http://www.jansainio.dk/finding-the-best-cheap-dog-food/ need to make sure that you get a secure fit between the mask and your dog’s head. Once you’ve made sure that it’s secure, then you may start to glue the mask onto the dog’s face. Take the piece of cardboard that is used for the foundation of the mask and fold it over. Make certain it’s quite strong and then use your hands to secure the cardboard down in place. Keep your hands out of the way and use tape to hold it in place as you repeat the process on the cardboard folds until you have the mask snugged securely onto the face of your dog. Don’t make the folds too large or else it might look messy. Once you’ve done this, you can then take out the mask and attach the cardboard ears. And attach the other area of the mask onto the dog. Make certain that the ears are level and make sure that it is not too short or long as this can cause some problems with the mask slipping off the dog’s face. If you are using a dog mask as your dog protection, you’ll need to do some sanding to be certain it’s secure on your dog. You can accomplish this by sanding off any excess paper that may have been removed from your mask.